WB-5000-5AC-KIT-IN

Supports IEEE 802.11a/n/ac standard
2×2 MIMO
Outdoor transmission distance up to 5km
Maximum air interface transmission rate of 867Mbps
Supports up to 20×4MP cameras at 5km
Integrated antenna for quick installation
Shipped in pairs with no configuration required
One-click pairing
Intelligent channel analysis and automatic optimal channel selection
Supports AP and relay modes
Supports DC12V and 12V PoE power supply
IP65 protection

Specifications

WB-5000-5AC-KIT-IN
Hardware Specification
Dimensions	268 × 115 × 45 mm
Weight	0.48 kg
Installation	Pole mounting, Wall mounting
Protection Level	IP65
Antenna Gain	18dBi
Beam Width	H: 30°, V: 15°
Max Power Consumption	10W
Physical Interface	1 × 10/1000Mbps RJ45; 1 × 10/1000Mbps RJ45 PoE IN
Indicator Light	1× Power Indicator, 1× WLAN Indicator, 1× LAN Indicator, 4× Signal Strength Indicators, 1× 5G WiFi Indicator
Maximum Transmitted Power	20 ± 2dBm @ 802.11ac VHT20 MCS0
Working Temperature	-30°C to 55°C
Working Humidity	-40°C to 70°C
Transmission Distance	5km
Transmission Capability	200Mbps/5km @ AC80; 110Mbps/5km @ AC40; 20× channels × 4MP @ AC80; 10× channels × 4MP @ AC40
Reset Button	Press and hold for 10 seconds to restore factory default settings; short press for 1 second to start pairing
Rx Sensitivity	-81 ± 2dBm @ AC80-MCS0; -56 ± 2dBm @ AC80-MCS9
Channel Width	20/40/80MHz, Auto/manual selection
ESD Protection	Contact 6KV, Air 8KV
Surge	POE/GE: CM 2KV, DM 1KV
Power Supply	Mode A: Powered by 12V passive PoE injector; Mode B: Powered by DC12V adapter
Software Specification
Protocol	IEEE 802.11a/n/ac
Frequency	5.150GHz to 5.850GHz; available channels may vary according to local regulations
Network Mode	Bridge
Management	Web
Ethernet	IPv4 static, DHCP, VLAN, IGMP Snooping, Multicast Acceleration
WiFi	Relay, User Isolation, Transmitted Power setting
System and Maintenance	Device upgrade, factory settings restoration, configuration import/export, device restart, system log, remote log, NTP
Security	WPA2-PSK, Hidden SSID, MAC Filtering